How To Use

How To Use – Rapid Soaker
Rapid Soaker

Ready. Aim. Soak. Everything you need to get your blaster firing in minutes.

Getting Started

How to Use Your Electric Water Gun

1
Unboxing

Remove & Inspect Your Blaster

Take your Rapid Soaker out of the box and check that all parts are present — the blaster body, USB charging cable, and any included accessories. Give the nozzle and water tank a quick visual check to make sure nothing was damaged in transit.

💡 Tip: Keep the box handy — it's the safest way to store your blaster during the off-season.
2
Charging

Charge Before First Use

Plug the included USB cable into the charging port on your blaster and connect to any USB power source (wall adapter, power bank, or laptop). Charge fully before your first use — this takes approximately 60–90 minutes. The indicator light turns solid when fully charged.

💡 Tip: A full charge gives you up to 45–60 minutes of continuous soaking action.
3
Loading Up

Fill the Water Tank

Open the water tank cap — located on the top or side of the blaster depending on your model. Fill with clean, fresh water. Do not overfill past the max fill line. Secure the cap tightly before use to prevent leaks.

💡 Tip: Use cold water for maximum soaking effect on a hot day. Avoid using coloured or flavoured liquids as these can damage the pump.
4
Power On

Switch On & Test Fire

Press and hold the power button for 2 seconds until the blaster activates. You'll hear the motor start. Point the nozzle in a safe direction and press the trigger to test. The electric pump delivers a powerful, continuous stream — no manual pumping needed!

💡 Tip: Wait 2–3 seconds after switching on before firing — this lets the pump prime itself for maximum range.
5
Game On!

Let the Battle Begin

Head outside and let loose! Your Rapid Soaker is designed for outdoor use. The electric motor gives you a consistent stream up to 8–10 metres, so you can stay competitive in any water fight. Release the trigger between bursts to conserve water and battery life.

💡 Tip: Refill the tank whenever it gets below ¼ full to keep the pump working at peak performance.
6
After Use

Empty, Rinse & Recharge

After every use, empty any remaining water from the tank to prevent mould or mineral buildup. Give the tank a quick rinse with clean water and leave the cap open to air dry. Recharge the battery so it's ready for next time.

💡 Tip: Never store the blaster with water left in the tank — this extends the life of your blaster significantly.

Important

Safety Guidelines

👁️

Avoid the face
Never aim directly at faces or eyes. Always aim for the body.

🧒

Adult supervision
Children under 8 should be supervised by an adult at all times.

🔌

No charging near water
Always charge the blaster indoors, away from water or wet surfaces.

☀️

Outdoor use only
This product is designed for outdoor use. Do not use indoors.

🚫

Fresh water only
Use only clean, fresh water. No liquids other than water should be used.

🔋

Don't overcharge
Unplug once fully charged. Do not leave charging unattended overnight.

Keep It Running

Care & Maintenance

🧽 Daily Care

  • Empty the water tank after every use
  • Rinse tank with clean water
  • Leave cap open to air dry completely
  • Wipe the exterior with a dry cloth

📦 Storage

  • Store in a cool, dry place
  • Keep out of direct sunlight
  • Store with battery partially charged (50%)
  • Keep away from extreme temperatures

🔧 Troubleshooting

  • Weak stream? Refill tank or recharge battery
  • No power? Hold power button for 2 full seconds
  • Leaking? Check tank cap is fully tightened
  • Motor noise but no water? Tank may be empty

⚠️ Do Not

  • Submerge the blaster in water
  • Use in rain or store wet
  • Disassemble the motor or electronics
  • Drop from height onto hard surfaces

Got a Question? We've Got You.

Can't find what you're looking for? Our team is happy to help.

Contact Support Returns & Refunds